July 26, 2012
Exascale computing is going to require chipmakers to build extremely efficient microprocessors. This has been the focus of the Green500 list, which forgoes talking about the world’s fastest clusters in favor of those with the best performance per watt rating. In this brave new world of high performance computing, and increasingly, and any kind of computing, chip efficiency is now under intense scrutiny.
Yesterday, Real World Technologies posted an article detailing the computational efficiency of CPUs and GPUs, and how those designs have evolved over the last three years. In the analysis, author David Kanter looks at both the computational performance per watt as well as performance per physical die area. He also compares how the chip architectures have faired since 2009, when Kanter did his initial analysis. The evaluations were based on double precision floating point performance.
In 2009, the standout in performance per watt and physical space was AMD’s RV770 GPU. The processor was able to perform 1.6 gigaflops/watt. It was also capable of performing just under one gigaflop per mm2. Intel’s Silverthorne processor was slightly less efficient than the RV770, but had far less density than AMD’s GPU. Subsequently renamed “Atom,” the chip was able to perform between 1.5 to 1.6 gigaflops/watt and was primarily tasked with powering mobile consumer devices.
While the R770 appeared to be the clear winner in 2009, GPUs were not widely accepted as compute engines and suffered a number of challenges. Many were unable to deliver double precision floating point calculations, and those that could, often did so with limited performance. Programming GPUs was also difficult, as APIs were in their early stages.
GPU technology has improved significantly over the past three years though. Almost all these “graphic” processors can perform double precision calculations and have become simpler to program, thanks to more mature programming frameworks like CUDA, and OpenCL. CPUs have also improved over the interval, including new vector extensions like x86 AVX.
So what does the landscape look like today? From Kanter's analysis:
IBM currently takes the energy efficiency crown with their Blue Gene/Q (BG/Q) processor, which just so happens to power the most powerful supercomputer in the world. The chip can perform roughly 3.75 gigaflops/watt and is represented in the top 20 systems on the current Green500 list. Not far behind in efficiency is NVIDIA’s Fermi GPU, which performs close to 3 gigaflops/watt. The K computer’s SPARC64 chip is just a little further behind at 2.2 gigaflops/watt. All other mainstream CPUs in use for HPC – Intel’s Sandy Bridge, AMD’s Interlagos and IBM’s POWER7 – are further back, below 1.5 gigaflops/watt.
Kanter says this divergence reflects a fundamental difference between traditional processors (x86 CPUs, POWER, and others) and throughput processors (GPUs and BG/Q). But, he notes, the difference in efficiency between the two groups has narrowed since 2009, and he expects them to eventually converge.
Probably not in the short-term though. Before the end of this year, Intel will release its first Many Integrated Core (MIC) coprocessor, now rebranded as Xeon Phi, which promises over 1 teraflop of absolute performance. It will directly compete with NVIDIA’s Kepler K20 GPU, also due out later this year. Both chips will probably best BG/Q silicon on performance/watt.
Further out, it should get even more interesting. Server-capable 64-bit ARM processors, low power x86 CPUs from Intel, heterogeneous CPU-GPU chips from (at least) AMD and NVIDIA, and whatever IBM is planning as sequel to BG/Q, are all in the pipeline for 2013-2014.
Full story at Real World Technologies
10/30/2013 | Cray, DDN, Mellanox, NetApp, ScaleMP, Supermicro, Xyratex | Creating data is easy… the challenge is getting it to the right place to make use of it. This paper discusses fresh solutions that can directly increase I/O efficiency, and the applications of these solutions to current, and new technology infrastructures.
10/01/2013 | IBM | A new trend is developing in the HPC space that is also affecting enterprise computing productivity with the arrival of “ultra-dense” hyper-scale servers.
Ken Claffey, SVP and General Manager at Xyratex, presents ClusterStor at the Vendor Showdown at ISC13 in Leipzig, Germany.
Join HPCwire Editor Nicole Hemsoth and Dr. David Bader from Georgia Tech as they take center stage on opening night at Atlanta's first Big Data Kick Off Week, filmed in front of a live audience. Nicole and David look at the evolution of HPC, today's big data challenges, discuss real world solutions, and reveal their predictions. Exactly what does the future holds for HPC?