November 17, 2008
Robust CDR extends copper cable length by 3X, resets jitter and crosstalk budget in high speed applications
AUSTIN, Texas, Nov. 17 -- SC08 -- Significantly extending the performance and reach of high-performance computing and networking interconnects, Gennum Corporation today announced the industry's first quad 10 gigabits per second (Gb/s) clock and data recovery (CDR) solution aimed at optical modules, backplanes, line cards and active copper cable assemblies. Used to restore and clean digital signals at extremely high data rates, the new quad 10 Gb/s CDR is the first to provide a retimed interface for Infiniband quad data rate (QDR), 40 Gigabit Ethernet (XLAUI) and 100 Gigabit Ethernet (CAUI) applications. As a result, module and system designers can design robust, high density, low cost systems today with Gennum's quad 10Gb/s CDR. The new GN2406, along with Gennum's PCI Express offerings, will be demonstrated at this week's Supercomputing Conference held at the Austin Convention Center, Nov. 17-20.
"High-performance computing applications, such as Infiniband QDR, largely rely on low cost copper interconnects and at 10 Gb/s, the impact of signal distortion and noise is significantly more pronounced than at 5 Gb/s or lower rates," said Bharat Tailor, director of marketing, networking, storage and computing, at Gennum. "The GN2406 device solves these issues by integrating a CDR, which effectively re-sets the system jitter budget at both ends of the link resulting in a much more robust system level solution. The end result is the highest level of performance and signal integrity for emerging Inifiniband QDR and 40 GbE and 100 GbE applications."
Quad 10 Gb/s CDR Enables High-performance Computing Applications
The GN2406 is a quad 10 Gb/s CDR with output de-emphasis, which is a form of transmit equalization that compensates for the loss of the transmission medium. Using the GN2406, copper cable or backplane trace losses of up to 25dB can be compensated, thus enabling cable lengths of up to 15 meters or backplane link lengths greater than 1 meter. Each channel in the GN2406 independently locks to data rates from 9.95 Gb/s to 11.3 Gb/s. To support legacy data rates, half rate (5Gb/s) and quarter rate (2.5Gb/s) operation is also supported. When used with a copper cable, backplane trace or an optical link, the CDR effectively re-sets the system jitter budget, minimizing the impact of impairments such as jitter and crosstalk on system performance.
The GN2406 CDR also functions without the need for a reference clock, which is important in active cable assembly or optical module applications where clocks are not necessarily available or desirable. With an industry leading power consumption of only 180mW per lane, the GN2406 is well suited for modules or active cable assemblies utilizing the QSFP or similar form factors.
Integrated Solution for 40 GbE and 100 GbE Applications
There is a need for a simple chip-to-chip or chip-to-module interface in 40 GbE (XLAUI) and 100 GbE (CAUI) applications, with up to 10 lanes of 10 Gb/s. The GN2406's ability to integrate four 10 Gb/s CDRs into a single package enables this interface, significantly simplifying system design. Additionally, the high sensitivity limiting amplifiers at the input make the new GN2406 suitable for use in 40 GbE or 100 GbE optical modules.
According to The Linley Group's Jag Bolaria, "The development of the 40 GbE and 100 GbE standards is well underway, with Infiniband QDR set to ramp through 2009. Gennum has developed a timely solution to address the signal integrity issues these systems will encounter."
GN2406 Enables 10 Gb/s Serial Backplanes
In a typical high-speed networking chassis design, the trace lengths from an ASIC on a line card to an ASIC on a switch card can exceed one meter in length with two connectors in the path. When crosstalk and other impairments are considered, there is a significant burden placed on the ASIC's receiver to compensate for the large losses and tolerate the excessive amount of jitter built up. The use of a high jitter tolerance CDR like the GN2406 as a backplane repeater greatly increases the robustness of the link and provides a simple retimed interface for ASIC communication.
Commenting on the applicability of the GN2406 in serial backplane applications, "We are extremely excited to be able to demonstrate real-world 10 Gb/s performance of our backplane interconnect technology enabled by Gennum's GN2406," adds Ryan Price, global product manager of Molex Inc., a leading backplane components manufacturer. "As the industry broadens its adoption of multi-gigabit systems, a demonstration of error-free data transmission at 10.3 Gbit/sec over a 1 meter FR408 I-Trac backplane channel provides an important assurance of practicality and robustness of such systems."
Pricing and Availability
Pricing for the GN2406 is $29.00 per unit in quantities of 10,000, and will sample in November with full production slated for April 2009. Evaluation boards for the GN2406 will be available in December, with a full copper cable reference design and backplane reference design available in January 2009. For more information, visit www.gennum.com/cdr.
About Gennum's 10 Gb/s Signal Integrity Solutions Portfolio
A pioneer in 10 Gb/s solutions, Gennum is the current leader in providing 10Gb/s CDRs for XFP multi-source agreement (MSA) compliant modules. With innovative signal integrity technology, Gennum currently offers a broad portfolio of CDRs, equalizers, serializers and deserializers for data communications and video applications.
Gennum Corporation (TSX:GND) designs innovative semiconductor solutions and intellectual property (IP) cores for the world's most advanced consumer connectivity, enterprise, video broadcast and data communications products. Leveraging the company's proven optical, analog and mixed-signal products and IP, Gennum enables multimedia and data communications products to send and receive information without compromising the signal integrity. A recognized award-winner for advances in high definition (HD) broadcasting, Gennum is headquartered in Burlington, Canada, and has global design, research and development and sales offices in Canada, Germany, India, Japan, Korea, Mexico, Taiwan, the United States and the United Kingdom.
Source: Gennum Corp.
10/30/2013 | Cray, DDN, Mellanox, NetApp, ScaleMP, Supermicro, Xyratex | Creating data is easy… the challenge is getting it to the right place to make use of it. This paper discusses fresh solutions that can directly increase I/O efficiency, and the applications of these solutions to current, and new technology infrastructures.
10/01/2013 | IBM | A new trend is developing in the HPC space that is also affecting enterprise computing productivity with the arrival of “ultra-dense” hyper-scale servers.
Ken Claffey, SVP and General Manager at Xyratex, presents ClusterStor at the Vendor Showdown at ISC13 in Leipzig, Germany.
Join HPCwire Editor Nicole Hemsoth and Dr. David Bader from Georgia Tech as they take center stage on opening night at Atlanta's first Big Data Kick Off Week, filmed in front of a live audience. Nicole and David look at the evolution of HPC, today's big data challenges, discuss real world solutions, and reveal their predictions. Exactly what does the future holds for HPC?